-
Recent Posts
Recent Comments
- Captain on Bottom Re-lamination
- Chris Hofman on Bottom Re-lamination
- Captain on Bottom Repair – The Big Peel!
- ed on Bottom Repair – The Big Peel!
- Captain on Bottom Repair – The Big Peel!
Archives
Categories
- Charging Systems (3)
- Diesel Maintenance (1)
- Dinghy Project (1)
- Electrical Systems (5)
- Equipment Installation (4)
- Fleet of Boats (5)
- General Maintenance (11)
- Golden Bear in San Francisco (1)
- Herrington Harbour North (5)
- Hull Maintenance (15)
- Maintenance Tips (6)
- Passage Making (2)
- Ports of Call (4)
- Random Bits of Living (20)
- Rigging Repair and Maintenance (12)
- Rudders (2)
- S/V Fin Log (7)
- Sail Maintenance (2)
- Second Star (40)
- Spirit (2)
- Travel Log (19)
Meta
Monthly Archives: July 2014
Bottom Re-lamination
I was not able to begin the re-lamination of the boat bottom before winter 2013-14 set in. It was an especially cold and long winter in Maryland and conditions were not good to start the resin work until June. However … Continue reading
Posted in Fleet of Boats, Hull Maintenance, Maintenance Tips, Second Star
2 Comments
Making a Passport 40 Rudder
In a previous post, I wrote about the process of making a mold using the old rudder. With the rudder mold now made, the process of making the new rudder can begin. First the mold halves are waxed and polished … Continue reading
Posted in Fleet of Boats, Maintenance Tips, Rudders, Spirit
Leave a comment